strut Sockets (actually electrical eye terminals) are just
the right size to mount the compression struts on
helicopters like the UFly. Compression struts are the
braces that go from the landing gear to the tail boom.
These will hold up to 2mm carbon fiber rod
(like flybars) or metal wire. They're strong metal but can
be bent to a proper mounting angle.
you're using Adapter22 on your UFly to mount SuperSkids landing
gear, you can use these to reconnect your struts.
These are a nice, tight fit with 2mm CF rods. If you Taper the
rod ends (round them off) with an emery board they'll
slide right in.
may also want to visit our Adapter22
come 4 to a pack. NOT in retail
Strut Sockets only. Screws and CF rod not included.